- IP-PBX integration & Green ICT
- Provides port-based remote power control to restart connected PoE devices individually
- Complies with IEEE 802.3/802.3af/ 802.3u/802.3x/802.1p/802.1q standards
- Supplies 48V/DC with 15.4W output per port (up to 195W) with internal Power Supply
- Web-based Configuration and Management
- Supports Auto-MDI/MDI-X and Auto-Negotiation
- Provides Store-and-Forward architecture
- Supports 16/24 port-based VLAN and 32 tag-based VLAN groups
- Supports 2 trunking groups (4 ports per group and up to 2 groups for each device)
IP-PBX integration & Green ICT
VoiSmart switch provides green ICT integration with VoiSmart Orchestra IP-PBX. Thanks to PoE ON/OFF Remote Control the IP Phones electrical supply can be linked to night service and other time rules to reduce power consumption.
IEEE 802.3af Power over Ethernet (PoE) port
VoiSmart switches feature IEEE 802.3af Power over Ethernet (PoE) ports supplying up to 15.4 watts per port with an overall power supply of 195 Watts. These products can convert standard 100~240V/AC power into low-voltage DC that runs over existing LAN cable to power up IEEE 802.3af compliant network accessories. They also feature PoE awareness to verify whether the network device receive power is IEEE 802.3af compliant, or only the data will be sent through LAN cable. By adding VoiSmart switch to existing networking, installing networking products such as IP Phones, Access Points and IP cameras can be easily managed and set up. Wireless device deployments are easily located with available power outlets and network administrators don’t need to use heavy AC power adapters anymore.
VoiSmart switch can be managed through Web Browser and provides web management features that are ideal for simple QoS/CoS applications and basic monitoring tools to improve network efficiency. Its security and management features such as bandwidth control, and VLAN to secure your network. Through a Web-based interface, an administrator can set up VLANs to segregate traffic, QoS to prioritize mission-critical data and link aggregation to create fat traffic pipelines. All of these features offer extra protection on the network edge. Best of all, the password-protected configuration interface can be accessed remotely.
Every port can automatically sense your type of cable, so there is no need for crossover cables whether you are connecting this switch to another switch or to a computer.
Every port can automatically sense if the connected network devices are running at 10Mbps, 100Mbps and 1000Mbps Half/Full-Duplex mode, and adjust accordingly.
This switch receives and forwards traffic seamlessly with its non-blocking wire-speed. Every port simultaneously supports up to 2000Mbps of bandwidth in full-duplex mode. This feature provides full wire speed to the connected devices and allows you to run a smooth network.
No Special Networking Cable Required
By adding PoE devices, you can use an existing standard Cat-5 Ethernet cable without a new electrical outlet for both power and data. It helps you reduce installation time and cost.
Store and Forward
By this function, this switch can maximize network performance while minimizing the propagation of bad network packets.
Number of Port
Link Aggregation Setting